Lambing Pens

Lambing Pen Hay Rack (Pack of 10)

Shearwell's hay racks slot into the middle partition of lambing pens to feed two ewes.

Standard slot 9mm x 150mm.

Wider slots are available on request.

Usually supplied in a flat pack of 10 racks, ready for assembly (feeds 20 ewes).

Please call the office on 01643 841611 to order or for delivery charges to your area

Lambing Pen Sides (Packs of 10)

Made of top-grade exterior ply and with locating pin.

4 Foot Pen Side = Dimensions: 48" x 32"
5 Foot Pen Side = Dimensions: 60" x 30"

Easy-to-assemble lambing sides to create uniform, secure lambing pens.

We recommend that pens are assembled from either four 4 ft sides or for triplets and large ewes with twins, two 4 ft sides and two 5 ft sides.

Note: Pen Sides are sold in packs of 10 sides

Please call the office on 01643 841611 to order or for delivery charges to your area

Get a FREE Shearwell Beanie with every Pen Side order.

To receive yours, please mention ‘free beanie’ when placing your order over the phone.

Shearwell Lamb Adopter - Additional

Panels required to make an additional 4 foot square pen suitable for all ewe sizes

Unique patented design supplied by Shearwell - lamb adopters can be used with lambing pen sides (also supplied by Shearwell).

Ewes are backed into the adopter through yoke doors allowing the adopter to be placed against a wall or another pen.

Additional adopters interlink with complete adopters, so that you require one less side per unit.

Supplied with:
1 four foot pen side
1 four foot pen back
1 adopter front
3 locating pins
1 slatted floor
2 dual height anti-crush bars

Please call the office on 01643 841611 to order or for delivery charges to your area

Shearwell Lamb Adopter - Complete

4 foot square pen suitable for all ewe sizes

Holds the ewe securely to help when fostering or to deal with mis-mothering

A complete lamb adopter system with solid sides so the ewe concentrates on the lamb, and a saloon door design that makes it easy to get the ewes in and out. These lamb adopters can be used with lambing pen sides so the ewe doesn’t have to move pens when a lamb is being fostered on. Instead just remove the pen front and replace with an adopter front.

Unique patented design supplied by Shearwell - lamb adopters can be used with lambing pen sides (also supplied by Shearwell). Ewes are backed into the adopter through yoke doors allowing the adopter to be placed against a wall or another pen.

Supplied with:
2 four foot pen side
1 four foot pen back
1 adopter front
4 locating pins
1 slatted floor
2 dual height anti-crush bars

Additional adopters available to interlink, so that you require one less side per unit.

Please call the office on 01643 841611 to order or for delivery charges to your area

Shearwell Lamb Adopter - Front

Supplied with:
1 adopter front
2 locating pins

Adopters and sides made from exterior ply.

Adopter front 18 mm thick

Please call the office on 01643 841611 to order or for delivery charges to your area